Call Toll Free (866) 889-8896 - Mon - Fri 8:30 am - 6:00 pm CST   |   Commercial Sales

Cart (0) ▼

How to Measure > Fire Pit + Chiminea + Patio Heater Covers

Measurements for your fire pit, chiminea, or patio heater can easily be found by using our diagrams and the following instructions:

Dia = Diameter - on round items, found by measuring from one side of the item across to the opposite side.

W = Width - found simply by measuring the longest side of the item.

D = Depth -  found by measuring the side adjacent to the W side.

H = Height - determined by measuring from the top of the item down to the ground.

Covering Tips

  • Select a cover that matches the dimensions of your furniture for best fit. If the dimensions of your furniture is not available, choosing a cover slightly larger in dimension will offer you an acceptable fit.
  • Often times, fire pits can be covered with table covers because the shapes and heights are similar to each other.
  • Fire pit covers, chiminea covers and patio heater covers aren't intended to touch the ground so that air can properly circulate underneath the cover. Don't worry if the cover doesn't come all the way down to the ground.
  • Allow your patio heating appliance to cool down before covering to prevent the outdoor cover from getting damaged. A good rule of thumb is to wait until you can place your hand on the appliance near the heat source and hold it without having to remove it. If the appliance passes this cool down test, then it can be covered.
Go back to How To Measure Shop Fire Pit Covers Shop Chiminea & Patio Heater Covers